Pile Drivers

Pile Drivers

Products

SUNWARD KOREA CO., LTD.

Hydraulic Crawler Pile Driver
SWCH920-210M
When using the pile driver, please refer to the above performance table.
Depending on site conditions and working methods,
you may replace and use the work equipment within the allowable capacity of the pile driver.
Using it beyond the specified capacity may be dangerous, so exercise caution.
- The allowable maximum traveling weight is 268 tons.
- Please use within the allowable maximum torque, allowable maximum digging distance, and allowable maximum pulling force (PULLING FORCE).
  (For details, refer to the operator's manual.)
- Using a leader longer than 48M may be dangerous, so please be careful.
- Using beyond the specified weight may be hazardous, so always exercise caution.
- Always keep the equipment clean and perform checks before and after use.
  (Neglect may cause engine, cylinder, or hydraulic line failures.)
- For filters and other consumables, check the replacement cycle before use.
- Use high-quality fuel to avoid starting issues and engine failures.

SWCH920-210M Exterior View

SWCH920-210M Specifications

Item		Unit	Main Parameters	Remarks
Engine	Model	-	B6.7	Cummins
	Rated Output	kW/rpm	186/2000
	Max. Torque	N·m/rpm	1152/1500
Leader	Leader Length	m	21, 24, 27, 30, 33, 36, 39, 42, 45, 48, 50
	Leader Diameter	mm	Ø920
	Main Guide	mm	Ø102 × 1000
	Auxiliary Guide	Ø	Ø70 × 330	Side for personnel
	Forward / Backward Inclination	°	±1.5
	Allowable Max. Pull-out Force	kN (t)	882 (90)	Conditional limits apply Refer to the operation manual
1st Drum	Single Line Speed	m/min	62 / 32	Free-fall function
	Wire Rope Diameter	mm	22	Low-speed operation, floating drilling available
	Wire Rope Capacity	m	600
2nd Drum	Single Line Speed	m/min	62 / 32	Free-fall function
	Wire Rope Diameter	mm	22	Low-speed operation, floating drilling available
	Wire Rope Capacity	m	600
3rd / 4th Drum	Single Line Speed	m/min	34	Free-fall function
	Wire Rope Diameter	mm	22
	Wire Rope Capacity	m	60 / 160
Leader Hoisting Drum	Single Line Speed	m/min	12	Ratchet device installed
	Wire Rope Diameter	mm	22 / 44
	Wire Rope Capacity	m	248
Work Platform Drum	Single Line Speed	m/min	6.4	Ratchet device installed
	Wire Rope Diameter	mm	14
	Wire Rope Capacity	m	110
Main Body	Max. Track Width (Extended)	mm	5280
	Min. Track Width (Retracted)	mm	3360
	Track Shoe Width	mm	3360
	Track Length	mm	6480
	Track Center Distance (Left/Right)	mm	5525
	Travel Speed	km/h	0.6 ~ 1.1
	Upper Slewing Speed	r/min	0.8 ~ 1	Slewing angle: 360°
	Gradeability	°	21.8 (40%)	Based on main body (Leader excluded, Aux. boom excluded, Counterweight excluded)
Overall Dimensions	Operating Condition	m	Approx. 14.8 × 7 × 53.1
Counterweight		t	20
Max. Allowable Traveling Weight		t	210	With working equipment installed Refer to the operation manual
Ground Contact Area		m²	11.25